Intercept Routing—No Destination
Description
Provides automatic redirection of incoming trunk calls that do not have a destination assigned. The intercept
destination is an operator (tenant/PBX).
Conditions
• Intercept Routing—No Destination on/off
The Intercept Routing—No Destination feature can be enabled or disabled through system
programming.
If disabled, a reorder tone will be sent to the caller. However, the Intercept Routing—No Destination
feature always functions for calls through the ELCOT, LCOT, or T1 (LCOT/GCOT) card even when
disabled.
• If an operator (tenant/PBX) is not assigned:
The extension connected to the lowest-numbered jack will be the intercept destination.
• Intercept Routing—No Destination also applies to calls from doorphones.
Programming Manual References
PC Programming Manual
2.8.3 [2-2] Operator & BGM—PBX Operator—Day, Lunch, Break, Night
2.16.7 [10-5] Miscellaneous—Intercept—Routing to Operator - No Destination (Destination is not
programmed)
PT Programming Manual
[006] Operator Assignment
Feature Guide References
2.2.5 Operator Features
Feature Guide
1.1 Incoming Call Features
1.1.2 Internal Call Features
1.1.2.1 Internal Call Features—SUMMARY
Description
The following types of internal calls are available:
Feature Description & Reference
Intercom Call A call from one extension to another.
. 1.5.3 Intercom Call
Doorphone Call When a call from a doorphone reaches its destination, the recipient
can talk to the visitor.
. 1.17.1 Doorphone Call
[Available Destination]
The destinations of doorphone calls can be assigned for each time mode (day/lunch/break/night) (. 2.2.4
Time Service) on a doorphone port basis.
Destination
Calling from
Extension Doorphone
Wired Extension (PT/SLT/ISDN Extension/T1-OPX)
PS
Incoming Call Distribution Group
PS Ring Group
Floating Extension no. for SVM
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analogue/ISDN Remote Maintenance
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Other PBX Extension (TIE with no PBX Code)
Other PBX Extension (TIE with PBX Code)
Wednesday, February 4, 2009
Incoming Call Features-3
Posted by Didik Pratama at 10:08 AM
Labels: Tutorial PABX
Subscribe to:
Post Comments (Atom)

0 Comments:
Post a Comment